The following comes in the tool kit with the bike:
- H6 T-Handle
- H6 Allen Key
- T25 Allen Key
- 17mm Skt (H6 Drive)
- T30 – (H6 drive)
- T40 – (H6 drive)
- T45 – (H6 drive)
- Flat – (H6 drive)
- PH2 – (H6 drive)
- 8 & 13mm Wrench
- 10 & 14mm Wrench
- 32mm Wrench
- Suspension tool (In all toolkits, but only useful on the ‘S’ Model)
The following are the dimensions for the fasteners most likely to be touched while riding:
- T25 Brake Lever Height
- T30 Bodywork
- T30 / H6 Hand Guards
- T30 / 10mm Skid Plate
- T40 Handlebars
- H5 / 14mm Mirrors
- 10mm / 13mm Chain Tension
- 32mm Rear Axle
- 32mm Front Axle
- T40 Front Axle Clamp
- T40 Triple Clamps
- 32mm Wrench Headstock
- 12mm Wrench Clutch cable
- 10mm Wrench Brake & Clutch Levers
- T45 Subframe
- T45 Luggage Rack
- T45 Brake Caliper
- T30 ABS Sensor
- 17mm Skt Shock High Speed Compression (R only)
- Flat Head Shock Low Speed Compression (R only)
- Flat Head Shock Rebound Damping (R only)
- H5 Shock Pre-Load (R only)
(Thanks to riverlink for the compilation)
Recent Comments