The following comes in the tool kit with the bike:

• H6 T-Handle
• H6 Allen Key
• T25 Allen Key
• 17mm Skt (H6 Drive)
• T30 – (H6 drive)
• T40 – (H6 drive)
• T45 – (H6 drive)
• Flat – (H6 drive)
• PH2 – (H6 drive)
• 8 & 13mm Wrench
• 10 & 14mm Wrench
• 32mm Wrench
• Suspension tool (In all toolkits, but only useful on the ‘S’ Model)

The following are the dimensions for the fasteners most likely to be touched while riding:

• T25 Brake Lever Height
• T30 Bodywork
• T30 / H6 Hand Guards
• T30 / 10mm Skid Plate
• T40 Handlebars
• H5 / 14mm Mirrors
• 10mm / 13mm Chain Tension
• 32mm Rear Axle
• 32mm Front Axle
• T40 Front Axle Clamp
• T40 Triple Clamps
• 32mm Wrench Headstock
• 12mm Wrench Clutch cable
• 10mm Wrench Brake & Clutch Levers
• T45 Subframe
• T45 Luggage Rack
• T45 Brake Caliper
• T30 ABS Sensor
• 17mm Skt Shock High Speed Compression (R only)
• Flat Head Shock Low Speed Compression (R only)
• Flat Head Shock Rebound Damping (R only)
• H5 Shock Pre-Load (R only)

(Thanks to riverlink for the compilation)